11
3. Toavoidkickback:
− Applythesegmentbetween8and11o’clock.
− Never apply the segment between 12 and 2
o’clock.
− Never apply the segment between 11 and 12
o’clockandbetween2and5o’clock,unlessthe
operator is well trained and experienced and
doesitathis/herownrisk.
− Neverusecuttingbladesclosetosolids,suchas
fences,walls,treetrunksandstones.
− Never use cutting blades vertically, for such
operationsasedgingandtrimminghedges.
Vibration
1. People with poor circulation who are exposed to
excessivevibration may experience injuryto blood
vesselsorthenervoussystem.Vibrationmaycause
thefollowingsymptomstooccurinthengers,hands
or wrists: “Falling asleep” (numbness), tingling,
pain,stabbingsensation,alterationofskincolor or
oftheskin.Ifany ofthesesymptomsoccur, seea
physician!
2. To reduce the risk of “white nger disease”, keep
yourhandswarmduringoperationandwellmaintain
thetoolandaccessories.
Transport
1. Beforetransportingthetool,turnitoffandwithdraw
the mains plug. Attach the cover to the cutting
blade.
2. When transporting the tool, carry it in a horizontal
positionbyholdingtheshaft.
3. When transporting the tool in a vehicle, properly
secureittoavoidturnover.Otherwisedamagetothe
toolandotherbaggagemayresult.
Maintenance
1. Have your tool serviced by our authorized service
center, always using only genuine replacement
parts. Incorrect repair and poor maintenance can
shortenthelifeofthetoolandincreasetheriskof
accidents.
2. Before doing any maintenance or repair work or
cleaningthetool,alwaysturnitoffandwithdrawthe
mainsplug.
3. Always wear protective gloves when handling the
cuttingblade.
4. Always clean dust and dirt off the tool. Never use
gasoline,benzine,thinner,alcoholorthelikeforthe
purpose.Discoloration,deformationorcracksofthe
plasticcomponentsmayresult.
5. Aftereachuse,tightenallscrewsandnuts.
6. Do not attempt any maintenance or repair not
described in the instruction manual. Ask our
authorizedservicecenterforsuchwork.
7. Alwaysuseourgenuinesparepartsandaccessories
only.Usingpartsoraccessoriessuppliedbyathird
party may result in the tool breakdown, property
damageand/orseriousinjury.
8. Requestourauthorizedservicecentertoinspectand
maintainthetoolatregularinterval.
Storage
1. Before storing the tool, perform full cleaning and
maintenance. Withdraw the mains plug.Attach the
covertothecuttingblade.
2. Storethetoolinadryandhighorlockedlocationout
ofreachofchildren.
3. Donotpropthetool againstsomething,suchasa
wall. Otherwise it may fall suddenly and cause an
injury.
First aid
1. Always have a rst-aid kit close by. Immediately
replaceanyitemtakenfromtherstaidkit.
2. Whenaskingforhelp,givethefollowinginformation:
− Placeoftheaccident
− Whathappened
− Numberofinjuredpersons
− Natureoftheinjury
− Yourname
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure
to follow the safety rules stated in this instruction
manual may cause serious personal injury.
PARTS DESCRIPTION (Fig. 1)
FUNCTIONAL DESCRIPTION
WARNING:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking the
functions on the tool.Failuretoswitchoffandunplug
may result in serious personal injury from accidental
start-up.
Power switch action (Fig. 2)
WARNING:
• Before plugging in, always check to see that the
switch trigger actuates properly and returns to
the “OFF” position when released. Do not pull the
switch trigger hard without sliding the lock-off
lever. This can cause switch breakage.Operatinga
tool with a switch that does not actuate properly can
leadtolossofcontrolandseriouspersonalinjury.
To prevent the switch trigger from being accidentally
pulled,alock-offleverisprovided.
Tostartthetool,slidethelock-offleverforwardandthen
pulltheswitchtrigger.Releasetheswitchtriggertostop.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
