Makita UR3502 User Manual

8
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or
seriousinjury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated(corded)powertoolorbattery-operated
(cordless)powertool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
darkareasinviteaccidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools
createsparkswhichmayignitethedustorfumes.
3. Keep children and bystanders away while
operating a power tool. Distractionscancauseyou
tolosecontrol.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduceriskofelectricshock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. Thereisanincreasedriskofelectric
shockifyourbodyisearthedorgrounded.
6. Do not expose power tools to rain or wet
conditions. Waterenteringapowertoolwillincrease
theriskofelectricshock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increasetheriskofelectricshock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Useof
acordsuitableforoutdoorusereducestheriskof
electricshock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. UseofanRCDreducestherisk
ofelectricshock.
10. Use of power supply via a RCD with a rated
residual current of 30 mA or less is always
recommended.
Personal safety
11. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
mayresultinseriouspersonalinjury.
12. Use personal protective equipment. Always wear
eye protection. Protectiveequipmentsuchasdust
mask, non-skid safety shoes, hard hat, or hearing
protectionusedforappropriateconditionswillreduce
personalinjuries.
13. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carryingpowertoolswithyour
ngeron the switch or energising power toolsthat
havetheswitchoninvitesaccidents.
14. Remove any adjusting key or wrench before
turning the power tool on. Awrenchorakeyleft
attached to a rotating part of the power tool may
resultinpersonalinjury.
15. Do not overreach. Keep proper footing and
balance at all times. Thisenablesbettercontrolof
thepowertoolinunexpectedsituations.
16. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Looseclothes,jewellery
orlonghaircanbecaughtinmovingparts.
17. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collectioncanreducedust-relatedhazards.
Power tool use and care
18. Do not force the power tool. Use the correct
power tool for your application. Thecorrectpower
tool will do the job better and safer at the rate for
whichitwasdesigned.
19. Do not use the power tool if the switch does not
turn it on and off. Any powertool that cannotbe
controlledwiththeswitchisdangerousandmustbe
repaired.
20. Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measuresreducetheriskofstartingthepowertool
accidentally.
21. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Powertoolsaredangerousinthehands
ofuntrainedusers.
22. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Manyaccidentsarecausedby
poorlymaintainedpowertools.
23. Keep cutting tools sharp and clean. Properly
maintainedcuttingtoolswithsharpcuttingedgesare
lesslikelytobindandareeasiertocontrol.
24. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Useofthepowertoolfor
operationsdifferentfromthoseintendedcouldresult
inahazardoussituation.
Service
25. Have your power tool serviced by a qualied
repair person using only identical replacement
parts. Thiswillensurethatthesafetyofthepower
toolismaintained.
26. Follow instruction for lubricating and changing
accessories.
27. Keep handles dry, clean and free from oil and
grease.

Makita UR3502 Specifications

General

Power source	AC
Type	String trimmer
Head type	Nylon line
Product color	Black, Blue
Uncertainty K	1.5 m/s²
Blade material	Nylon
Plant protector	Yes
Rotational speed	5700 RPM
Sound power level	93.84 dB
Sound pressure level	85.3 dB
Cutting diameter (max)	350 mm
Sound power level uncertainty	1.58 dB
Sound pressure level uncertainty	2.5 dB

Weight and Dimensions

Length	1630 mm
Weight	4900 g