Makita UR3502 User Manual

14
MAINTENANCE INTERVAL
Parts: Interval: Howto:
Powercord Everytimebeforeusing
Visuallyinspectwhetheritisnotbadlywornor
damaged.Ifitisdamaged,askyourlocalservicecenter
forrepair.
Auxiliaryhandlescrew Everytimebeforeusing
Checkwhetherscrewisnotloose.Tightenthescrewif
itisloose.Replacethescrewifitisdamaged.
Cuttingtoolguard
(protector)
Everytimebeforeusing
Checkwhetherscrewisnotloose,whetherprotectoris
notdamaged.Tightenthescrewifitisloose.Replace
theprotectorifitisdamaged.
Cutterblade Every10h
Lubricatewithanticorrosiveoilaftereachuse.Check
whetheritisnotdamaged.Replaceitifitisdamaged.
Nyloncuttinghead Every10h
Visuallyinspectwhetheritisnotbadlywornor
damaged.Replaceitifitisdamaged.
Gearshaft Every10h Lubricatewithanticorrosiveoil.
TROUBLESHOOTING
Beforeaskingforrepairs,conductyourowninspectionrst.Ifyoundaproblemthatisnotexplainedinthemanual,
donotattempttodismantlethetool.Instead,askMakitaAuthorizedServiceCenters,alwaysusingMakitareplacement
partsforrepairs.
Malfunctionstatus Cause Action
Motordoesnotrun.
Powermainsisnotpluggedin. Pluginthemains.
Powercablebroken.
Ask your local authorized service
centerforrepair.
The drive system does not work
correctly.
Motorstopsrunningafteralittleuse. Overheating.
Stopusingoftooltoallowittocool
down.
ItdoesnotreachmaximumRPM.
The drive system does not work
correctly.
Ask your local authorized service
centerforrepair.
Cuttingtooldoesnotrotate:
stopthemachineimmediately!
Foreign object such as a branch is
jammedbetweentheguardandthe
cuttingtool.
Removetheforeignobject.
Cutterbladefasteningnutisloose.
Tightenthenutproperlyasdescribed
inthismanual.
Thecutterbladeisbended. Replacethecutterblade.
The drive system does not work
correctly.
Ask your local authorized service
centerforrepair.
Abnormalvibration:
stopthemachineimmediately!
Oneendofthenyloncordhasbeen
broken.
Bumpthenyloncuttingheadagainst
the ground while it is rotating to
causethecordtofeed.
Thecutterbladeisbended,cracked
orworn.
Replacethecutterblade.
Cutterbladefasteningnutisloose.
Tightenthenutproperlyasdescribed
inthismanual.
Cutterbladeisfastenedimproperly.
The drive system does not work
correctly.
Ask your local authorized service
centerforrepair.
Cuttingtoolandmotorcannotstop:
Disconnect the mains plug
immediately!
Electricorelectronicmalfunction.
Disconnectthemainsplugandask
yourlocalauthorizedservicecenter
forrepair.

Makita UR3502 Specifications

General

Power source	AC
Type	String trimmer
Head type	Nylon line
Product color	Black, Blue
Uncertainty K	1.5 m/s²
Blade material	Nylon
Plant protector	Yes
Rotational speed	5700 RPM
Sound power level	93.84 dB
Sound pressure level	85.3 dB
Cutting diameter (max)	350 mm
Sound power level uncertainty	1.58 dB
Sound pressure level uncertainty	2.5 dB

Weight and Dimensions

Length	1630 mm
Weight	4900 g