5
1
MHT 10120 L M
Series
- The manufacturer makes available (with warranty) a vast range of accessories perfectly suited to your lift-
truck.
- The accessories are supplied complete with a load diagram relating to your truck. The user manual and the
load diagram must be kept on the truck. The use of the possible accessories is subject to the instructions in
this manual.
Some specific uses require adaptation of the accessory, not included in the optionals in the catalogue.
Other solutions are possible; contact your agent or dealer for further information.
Only accessories approved and
“CE”
certificates by the manufacturer can be used on our lift-trucks
.
The manufacturer will have no liability in case of modifications or use of accessories without his knowledge.
Manitou assures oneself about the employement’s capacity of this machine in normal conditions of working
foreseen in the user’s manual, with a static test coefficient of 1.33 and a dynamic test coefficient of 1, foreseen
in the harmonized rules EN 1459 for the truck with variable capacity and EN 1726-1 for the forklift.
Do not use interchangeable accessories not originally included in the machine supply.
For subsequent requests for implementation of machine functions using other accessories, before starting up
the machine, the user must request inspection for suitability for use by an authorized MANITOU technician,
who will check the correct working and updating of the documentation necessary for using the new accessory.
It is only after this inspection that a new “CE” conformity certificate will be issued for the machine indicating
only the new accessories installed.
INTRODUCTION
INTRODUCTION
To Next Page
Loading...
Need help?
General