1
19
MHT 10120 L M
SS
eries
Introduction.
- Our lift trucks have been designed for easy handling by the operator and maximum
ease of maintenance for the mechanic.
- However, before commencing to operate the lift truck, the user should carefully read
and understand the various chapters of this manual which has been provided to solve
driving and maintenance problems. By following these instructions the user will be able
to take full advantage of the versatility of this lift truck.
- The operator must familiarize himself with the positions and functions of all the controls
and instruments before operating the lift truck.
Do not attempt to start a new lift truck before the following checks have been carried
out:
Lubrication.
- Check that all the correct grades of oils and greases that are required are available ;
see chapter : SERVICING SCHEDULE in paragraph : 3 - MAINTENANCE and top up
if necessary.
For operation under average climatic conditions, i.e. : between -15 °C and + 35 °C, cor-
rect levels of lubricants in all the circuits are checked in production. For operation under
more severe climatic conditions, before starting up, it is necessary to drain all the circuits,
then ensure correct levels of lubricants using lubricants properly suited to the relevant
ambient temperatures. It is the same for the cooling liquid (Contact your dealer for infor-
mation, if necessary).
Dry air filter.
- Ensure that the air filter is undamaged and not blocked.
- Tighten the fastening devices if necessary.
Never run the I.C. engine with the air filter removed or damaged.
Cooling circuit.
- Always check the cooling liquid level before starting up the lift truck.
Hydraulic circuit
- Visually check for oil leakage or sweating on the couplings, hose pipes, pipes and
unions. Tighten or check the defective connections, if necessary.
- Also check the oil level in the tank.
BEFORE ST
BEFORE ST
AR
AR
TING UP
TING UP
A
A
NEW LIFT TRUCK
NEW LIFT TRUCK
To Next Page
Loading...
Need help?
General