6
1
MHT 10120 L M
SS
eries
O
O
P
P
E
E
R
R
A
A
T
T
I
I
N
N
G
G
I
I
N
N
S
S
T
T
R
R
U
U
C
C
T
T
I
I
O
O
N
N
S
S
A - Driver’s operating instructions.
- Wear clothes suited for driving the lift truck, avoid loose clothes.
- Never operate the vehicle when hands or feet are wet or soiled with greasy sub-
stances.
- For increased comfort, adjust the driver’s seat to your requirements and adopt the cor-
rect position in the driver’s cab.
- The operator must always be in his normal position in the driver’s cab. It is prohibited
to have arms or legs, or generally any part of the body, protruding from the driver’s cab
of the lift truck.
- Always remember to fasten your seat belt and adjust it to your requirements.
- The control units must never in any event be used for any other than their intended
purposes (e.g. climbing onto or down from the lift truck, portmanteau, etc.).
- If the control components are fitted with a forced operation (lever lock) device, it is for-
bidden to leave the cab without first putting these controls in neutral.
- Never allow a passenger to travel on the lift truck in the driver’s cab.
B - Before starting the lift truck.
- If the lift truck is new, refer to chapter : BEFORE STARTING UP A NEW LIFT TRUCK
in paragraph : 1 - OPERATING AND SAFETY INSTRUCTIONS.
- Check the condition of the tyres and the tyre pressures (See chapter : CHARACTER-
ISTICS in paragraph : 2 - DESCRIPTION).
- Before starting the lift truck, check the different levels :
• Engine oil.
• Hydraulic reservoir oil.
• Transmission oil.
• Cooling liquid.
• Brakes fluid.
- Also check for possible leakage of oil, fuel or liquid from the lift truck.
- Check the closing and locking of the hood.
- Whatever his experience as a truck driver is, the operator is advised to familiarize him-
self with the position and operation of all the controls and instruments before operating
the lift truck.
C - Starting the lift truck.
Safety notice.
The lift truck must only be started up or manoeuvred when the operator is sitting in the
driver’s cab, with his seat belt adjusted and fastened.
- Never try to start the lift truck by pushing or towing it.
Such operation may cause severe damage to the transmission. If necessary, to tow the
lift truck in an emergency, the gear-box must be placed in the neutral position (See
chapter : G2 - OCCASIONAL MAINTENANCE in paragraph : 3 - MAINTENANCE).
To Next Page
Loading...
Need help?
General