EasyManuals Logo
Home>Manitou>Forklifts>M Turbo Series

Manitou M Turbo Series User Manual

Manitou M Turbo Series
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
1
17
MHT 10120 L M
SS
eries
A - General.
- Read the operator's manual carefully and ensure you understand it.
- Stop the I.C. engine, when an intervention is necessary.
- Wear clothes suitable for the maintenance of the lift truck, avoid wearing jewellery and
loose clothes. Tie and protect your hair, if necessary.
- Ensure the area is sufficiently ventilated before starting the lift truck.
Make sure that the disposal of process materials and of spare parts is
carried out in total safetyand in a ecological way.
- Carry out all repairs immediately, even if the repairs concerned are minor.
- Repair all leaks immediately, even if the leak concerned is minor.
- Do not attempt to loosen unions, hoses or any hydraulic component with the circuit
under pressure.
The handling and removal of the balancing valves or safety valves which may be fitted
to the cylinders of your lift truck can be dangerous. A balancing valve must only be
removed when the cylinder concerned is at rest and the hydraulic circuit is depres-
surised.
This operation can only be carried out by authorised staff.
- Do not smoke or approach the lift truck with a flame, when the fuel tank is open or is
being filled.
- Take care not to burn yourself (Exhaust, radiator, I.C. engine, etc.).
- Disconnect the negative cable terminal (-) from the top of the battery before working on
the electrical circuit or on the lift truck (e.g. : Welding).
- Do not drop metallic items on the battery.
- When carrying out electric welding work on the lift truck, connect the negative cable
from the equipment directly to the part being welded, so as to avoid high tension cur-
rent passing through the alternator.
B - Maintenance.
- The maintenance and the keeping in compliance of the lift truck are compulsory.
- Carry out daily maintenance (See chapter : A - DAILY OR EVERY 10 HOURS SER-
VICE in paragraph : 3 - MAINTENANCE).
- Do not run the I.C. engine without air filter, or with oil, water or fuel leaks.
Wait for the I. C engine to cool before removing the radiator cap.
- Change the filter cartridges (See servicing schedules in chapter : FILTERS CAR-
TRIDGES AND BELTS in paragraph : 3 - MAINTENANCE).
MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK
MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK
INTRODUCTION TO SAFETY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou M Turbo Series and is the answer not in the manual?

Manitou M Turbo Series Specifications

General IconGeneral
BrandManitou
ModelM Turbo Series
CategoryForklifts
LanguageEnglish

Related product manuals