Manitowoc CVD1475 User Manual

–95–
MAIN FUSE
Function
The control board fuse stops ice machine operation if
electrical components fail, causing high amp draw.
Specifications
The main fuse is 250 Volt, 7 amp.
Check Procedure
1. If the bin switch light is on with the water curtain
closed, the fuse is good.
2. Remove the fuse. Check the resistance across the
fuse with an ohmmeter.
! Warning
High (line) voltage is applied to the control board
(terminals #55 and #56) at all times. Removing the
control board fuse or moving the toggle switch to
OFF will not remove the power supplied to the
control board.
! Warning
Disconnect electrical power to the entire ice
machine before proceeding.
Reading Result
Open (OL) Replace fuse
Closed (O) Fuse is good

Manitowoc CVD1475 Specifications

General

Brand	Manitowoc
Model	CVD1475
Category	Ice Maker
Language	English