Maintenance work on the superstructure
8.6 Hydraulic system
8 - 36 3 302 744 en Maintenance manual
GMK5250L
09.03.2018
8.6.6 Changing the ventilation filter
Spare parts and
tools
Prerequisites – The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
• Remove the cap (2).
• Change the filter (3) and fasten the cap.
• Reset the display by depressing the pin (1)
on the housing.
Designation Quantity GROVE part no.
Filter 1 03134932
O
Risk of damage to the environment from filter residues.
Store used hydraulic oil filter inserts in suitable receptacles and have them
disposed of properly by qualified personnel.
To Next Page
Loading...
Need help?
General
