5-17
RT765E-2 SERVICE MANUAL HOIST AND COUNTERWEIGHT
Published 9-04-2014, Control # 422-08
HOIST CONTROL VALVES
Description
NOTE: For more detailed information, refer to Valves,
page 2-30 in Section 2 - Hydraulic System.
Hydraulic Hoist Motor Control Valve
The hydraulic hoist motor control valve is mounted on the
hoist and is designed to provide an even flow of oil to the
hoist motor in both directions. This is a different valve than
the hoist motor control valve that applies and releases the
hydraulic piston and hydraulic cylinder.
Hoist Directional Control Valve
The hoist directional control valve is used to control the
operation of the hoist. It is a four-way, pilot operated valve
and is mounted on the right side of the turntable.
Reference Only
To Next Page
Loading...
Need help?
General
