EasyManuals Logo
Home>Manitowoc>Construction Equipment>Grove RT765E-2

Manitowoc Grove RT765E-2 Service And Maintenance Manual

Manitowoc Grove RT765E-2
330 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
2-51
GROVE
RT765E-2 SERVICE MANUAL HYDRAULIC SYSTEM
2
Published 9-04-2014, Control # 422-08
PARKING BRAKE/RANGE SHIFT VALVE
Description
The parking brake/range shift valve controls the flow of oil to
the parking brake, hi-low range and axle disconnect
actuators by the use of two solenoid valves Figure 2-30. The
valve is located on the center of the frame. Pressure is
supplied to the valve from the transmission charge pump.
The parking brake solenoid valve is a two position three-way
valve. In its de-energized position, the inlet port is blocked
and the parking brake actuator is drained to the reservoir.
When the solenoid is energized, the reservoir port is blocked
and pressurized oil is directed to the actuator, engaging the
parking brake.
The range shift solenoid valve is a two position four-way
valve. In its de-energized position, pressurized oil flows to
the “A” port of the range shift actuator, while the “B” port is
drained to the reservoir along with the axle disconnect
actuator for two wheel drive/high range. When the solenoid
is energized, pressurized oil is directed to the “B” port of the
range shift actuator and the axle disconnect actuator while
port “A” of the range shift actuator is drained to the reservoir
for four wheel drive/low range.
Maintenance
Removal
1. Tag and disconnect the electrical connectors to the
valve.
2. Tag and disconnect the hydraulic hoses from the valve.
Cap or plug the lines and ports.
3. Remove the capscrews, lockwashers, flatwashers and
nuts securing the valve to the frame. Remove the valve.
Installation
1. Secure the valve to the frame with the nuts, flatwashers,
lockwashers and capscrews. Torque capscrews; refer to
Fasteners and Torque Values, page 1-16 for proper
torque value.
2. Connect the hydraulic hoses to the ports on the valve as
tagged during removal.
3. Connect the electrical connectors to the valve as tagged
during removal.
Functional Tests
1. Start and idle engine.
2. With units on outriggers, check for proper two/four wheel
operation.
Reference Only

Table of Contents

Other manuals for Manitowoc Grove RT765E-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Grove RT765E-2 and is the answer not in the manual?

Manitowoc Grove RT765E-2 Specifications

General IconGeneral
BrandManitowoc
ModelGrove RT765E-2
CategoryConstruction Equipment
LanguageEnglish

Related product manuals