54 Part Number Preliminary 6/11
Step 4 Wait until the clean cycle is complete
(approximately 24 minutes). Then disconnect power to
the ice machine (and dispenser when used).
Step 5 Remove parts for cleaning.
Please refer to the proper parts removal for your ice
machine. Continue with step 6 when the parts have
been removed.
Single Evaporator Ice Machines - page 58
Multiple Evaporator Ice Machines - page 60
Step 6 Mix a solution of cleaner and lukewarm water.
Depending upon the amount of mineral buildup, a
larger quantity of solution may be required. Use the
ratio in the table below to mix enough solution to
thoroughly clean all parts.
Disconnect the electric power to the ice machine
at the electric service switch box.
Solution
Type
Water Mixed With
Cleaner 1 gal. (4 L) 16 oz (500 ml)
cleaner
To Next Page
Loading...
Need help?
General