To Next Page

To Previous Page

Part Number Preliminary 6/11 55

Step 7 Use 1/2 of the cleaner/water mixture to clean

all components. The cleaner solution will foam when it

contacts lime scale and mineral deposits; once the

foaming stops use a soft-bristle nylon brush, sponge

or cloth (NOT a wire brush) to carefully clean the parts.

Soak parts for 5 minutes (15 - 20 minutes for heavily

scaled parts). Rinse all components with clean water.

Step 8 While components are soaking, use 1/2 of the

cleaner/water solution to clean all food zone surfaces

of the ice machine and bin (or dispenser). Use a nylon

brush or cloth to thoroughly clean the following ice

machine areas:

• Side walls

• Base (area above water trough)

• Evaporator plastic parts - including top, bottom,

and sides

• Bin or dispenser

Rinse all areas thoroughly with clean water.

SANITIZING PROCEDURE

Step 9 Mix a solution of sanitizer and lukewarm

water.

Step 10 Use 1/2 of the sanitizer/water solution to

sanitize all removed components. Use a spray bottle

to liberally apply the solution to all surfaces of the

removed parts or soak the removed parts in the

sanitizer/water solution. Do not rinse parts after

sanitizing.

Solution

Type

Water Mixed With

Sanitizer 3 gal. (12 L) 2 oz (60 ml) sanitizer

Manitowoc Indigo Series User Manual

Other manuals for Manitowoc Indigo Series