24 Part Number 80-1505-3 6/11
• The location must be free of airborne and other
contaminants.
• The air temperature must be at least 35°F (1.6°C),
but must not exceed 110°F (43.4°C).
• The location must not be near heat-generating
equipment or in direct sunlight.
• The location must not obstruct airflow through or
around the ice machine. Refer to ice machine
head section clearance requirements.
ICE MACHINE HEAD SECTION
CLEARANCE REQUIREMENTS
S600C/S680C/S850C/S1000C/S1200C/S1470C/
S1870C/S2070C/S2170C
Top 5” (12.7 cm) is recommended for efficient
operation and removal of top cover/servicing.
Sides 5” (12.7 cm) is recommended for efficient
operation and servicing. There is no minimum
clearance required.
Back 3” (7.6 cm) required when routing electrical inlet,
water inlet and refrigeration tubing out of the top of the
unit.
5” (12.7 cm) required when routing all connections out
the back.
IB0600CIB0680C/IB0680C/IB0800C/IB1000C
Top 2” (5.1 cm) required clearance for cleaning
procedures and servicing.
Back 5” (12.7 cm) required when routing all
connections out the back.
Sides 8” (20.3 cm) required for servicing.
S3070C
Top/Sides 8” (20.3 cm) recommended clearance for
efficient operation and removal of top cover/servicing.
There is no minimum clearance required.
Back 24” (61.0 cm) required when routing all
connections out the back.
NOTE: 24” (61.0 cm) on all sides is recommended
to allow access without moving the machine.
To Next Page
Loading...
Need help?
General