64 Part Number 80-1505-3 6/11
Electronic Bin Thermostat Instructions
IB600C/IB680C/IB800C/IB1000C Only
POSITIONING
1. Remove water trough.
2. Refer illustration below.
A. Loosen rear screw.
B. Remove front screw & rotate probe/bracket.
C. Re-install front screw & tighten.
D. Tighten rear screw.
3. Re-install water trough.
4. Remove slack from sensor probe wire and verify wire
does not contact or obstruct the water curtain or water
level probe.
5. The control is preset and does not require programming.
For control specifications refer to page page 193.
Bin Thermostat Location
Control Location
To Next Page
Loading...
Need help?
General