Marey GA16ETL User Manual

5150
Type of Appliance
Temp. controlled continuous Flow Gas Hot Water Unit
Operation
With/without remote controls, mounted in kitchen,
bathroom, etc
Flue System
Room Sealed-Forced Draught Flue
Available default Temperatures
Factory setting 107ºF
Rated gas
pressure
Natural Gas
7 inch W.C.(1 740Pa)
Propane (LPG) 11 inch W.C.(2 740Pa)
Temperature Range
Within 95ºF~149ºF(35ºC~65ºC)
Width x Height x Depth
14" x 22" x 6" (353mm x 568mm x 142mm)
Weight
35lbs (16kg)
Connections
Gas
½ in.NPT
Cold Water Supply
½ in.NPT
Hot Water Supply
½ in.NPT
Ignition System
Direct Electronic Ignition
Max./Min. Gas
Consumption
Natural Gas
110,000 Btu/h-20,000 Btu/h
Propane Gas
107,000 Btu/h-20,000 Btu/h
Hot Water Delivery Capacity Max
4.2 GPM (45ºF rise)
5.4 GPM (35ºF rise)
Noise level
70 dB(A)
Thermal efficiency
0.82
NOXaf
40 ppm Max
Minimum Operating Water Flow 0.66 GPM (2.5 L/min)
Minimum Operating Pressure
1.45 PSI (0.1 bar)
Power Supply
120 Volts ~ 60Hz
Water temperature control
Input and output water temperature signals
Water flow control
Electronic Water flow sensor
TECHNICAL SPECIFICATIONS
GA16ETL
Safety Device
Flame Failure Flame rod
Boil dry
Water flow sensor /194ºF thermistor
Over temperature
185ºF (Integrated circuit system)
Pressure relief
valve
Opens 145 PSI
Fusible link
320ºF Thermal Fuse
Combustion fan
rpm check
Integrated circuit system
Over current
Glass fuse (5 Amp/3Amp)
Bathroom,
Second Bathroom,
Kitchen,
(universal / Up to
3 Controllers )
Kitchen/Bathroom/Second Bathroom
(universal / Up to 3 Controllers)
Remote Control
Cable Optional
Electrical Consumption( Normal)
55W

Marey GA16ETL Specifications

General

Brand	Marey
Model	GA16ETL
Category	Water Heater
Language	English