1-10
MF 5650 ADVANCED
1. Safety Guidelines
1
ATTENTION!
Pressurized hydraulic fluid or diesel leak
can penetrate in your skin and cause
severe personal injuries, blindness or
even death. Pressurized fluid leaks may
not be visible. Use a carton board or
wood to find the leaks. DO NOT place
your hands directly to the equipment.
Always wear protective goggles. If the
fluid penetrates in your skin, it must be
surgically removed within a few hours
by a physician familiarized with such
procedure (Fig. 9).
Before applying pressure to the fuel or the hydraulic
system, make sure that all connections are well fit
and all tubing, pipes and hoses are in good
conditions. Before disconnecting the hydraulic or
fuel lines, relieve all pressure. Make sure that all
hydraulic lines are correctly installed and without
bents.
CAUTION!
The cooling systems accumulate
pressure as the engine warms. Before
removing the radiator cap, stop the
engine and wait the system cool down.
• Ckeck the enigne cooling system and add
coolant, as necessary.
7.5 - Cleaning the harvester
• Keep the working surfaces and engine
compartments clean.
• Before cleaning the machine, always lower the
platform to the ground level, set the
transmission to neutral, apply the parking
brake, stop the engine and remove the starting
key from the ignition.
• Clean the steps, the pedals and operator
platform. Remove the grease or oil. Clean all
dust or mud off. In the winter, remove the snow
or ice. Remember: slippery surfaces are
dangerous.
• Remove and store the tools, chains or hooks.
Fig. 9
7.6 - Protect the environment
It is illegal to pollute sewer, brooks or soil. The waste
must be sent to authorized places, away from urban
or preservation areas. Furthermore, the dirty oil
removed from the machine must be packed in
proper containers before being disposed. If you
have any questions, contact the local authorities.
To Next Page
Loading...
Need help?
General
