1-4
MF 5650 ADVANCED
1. Safety Guidelines
1
Left Side and Right Side Convention
The expressions left side and right side
used throughout this Manual refer to
point of view of an observer seating on
the harvester seat, looking forward
(fig. 1).
3 - The Harvester
This product’s design presents its own
characteristics for a number of soil conditions,
topographies, weather and cropping length. At the
same time, it presents simple operation and
provides a low cost operation and high
performance.
The information in this Manual describe the
operation, maintenance and service procedures for
your harvester to help you keep your equipment in
continuous operation throughout the cropping
period.
The smart investment of purchasing this equipment
requires a special atention from all people who will
handle it.
This Manual has a simple language, directly
designed to provide the users with a better
understanding and familiarization with your
equipment and to achieve better working results and
improved efficiency in cropping.
A properly maintained equipment will present a
better cost efficiency than those with neglected
maintenance services.
AGCO do Brasil Field Engineering has tested this
harvester under all cropping conditions.
The equipment design is so simple that a large part
of maintenance services can be performed by the
owner.
We present all possible issues for each situation,
listing the likely causes and providing
recommendations for the most appropriate
solutions. It is always more convenient to find out
the cause of the problem and definitely solve it than
performing rushed services with “handy” solutions
without eliminating the cause which can cause
problems throughout the cropping and reducing the
equipment’s life cycle.
IMPORTANT:
This manual has tables and other
references to perform the harvester’s
setups. As it is impossible to present all
setups for all kinds of cropping, working
conditions, soils, weather etc., the setup
instructions in this Manual are meant for
an initial setup for a regular condition.
These setups must be used as a starting
point to perform further adjustments, if
necessary, to prepare the equipment for
a specific condition. So, even though all
precautions have been taken so that all
setup and handling processes be as
accurate as possible, the approach for
the operation procedures is simply
recommendations and the Company
can not assume any responsability for
any losses or damages resulting from
them, nor for any misstatement or
omission. We strongly recommend that
the users contact the Massey Ferguson
Dealership Network for any problem
derived from services or operations of
the equipment.
Left
side
Right
Side
Fig. 3
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
