EasyManuals Logo
Home>MasterCraft>Boat>2014 X10

MasterCraft 2014 X10 User Manual

MasterCraft 2014 X10
285 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #202 background imageLoading...
Page #202 background image
Windshield
In cleaning tempered glass windshields,
the normal glass cleaners (from spray bot-
tles or aerosol cans) work best. While the
glass is very strong, it can be scratched if
anything abrasive is used. Harsh chemicals
or solvents should be avoided because they
may affect the vinyl gaskets or powder-
coated nish on the extrusions.
Canvas Covers
The material used in constructing Bi-
mini tops and boat covers is made from 100
percent solution-dyed polyester ber with a
urethane coating to provide excellent water
repellency and mildew resistance. This de-
sign allows the material to be easily main-
tained. By following a few simple care and
cleaning steps, the fabric will continue to
look good and maintain its ne qualities for
seasons to come.
Important Background Information
Because the fabrics are woven, they are
breathable. It’s also important to know that
these fabrics are treated with a uorocar-
bon nish, which enhances water repellen-
cy. This nish requires replenishment after
vigorous cleaning.
Polyester fabric will not support the
growth of mildew. Mold and mildew need
something on which to grow and polyester
fabric is not a desirable substance for such
growth. Dirt or dust on the fabric, however,
is a perfect source for mildew growth, which
makes regular cleaning of the fabric impor-
tant.
There is no set time for when the fabric
should be cleaned, and the local environ-
ment has a great deal to do with determin-
ing cleaning frequency. Cleaning is re-
quired less frequently in a dry environment
than in a humid one where heavy foliage
exists.
The material has an applied nish that
deters mold and mildew growth, but it does
not make it mold-proof. Keeping the fabric
free of dirt and foreign substances is impor-
tant in deterring mold growth.
Cleaning
One of the best ways to keep the ma-
terial looking fresh and new, and to delay
the need for deep or vigorous cleaning, is
to hose off fabrics with clear water on at
least a monthly basis with clear water. This
practice will help prevent dirt from becom-
ing deeply embedded in the fabric, and it
will eliminate the need for more frequent
and more vigorous cleanings.
In most environments, a thorough
cleaning will be needed approximately ev-
ery two (2) years.
The fabric can be cleaned while still in
the boat. When cleaning, it is important to
observe the following:
Always use a natural soap—never deter-
gent.
Water should be cold to lukewarm, but
never more than 100 degrees.
Air dry only. Never apply heat to the
fabric.
Begin by brushing off loose dirt, and
Care and Maintenance • 2014 MasterCraft Owners Manual Page 6-9
C A R E A N D M A I N T E N A N C E

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft 2014 X10 and is the answer not in the manual?

MasterCraft 2014 X10 Specifications

General IconGeneral
BrandMasterCraft
Model2014 X10
CategoryBoat
LanguageEnglish

Related product manuals