Track Manager
It is possible to set up multiple tracks for displaying on the GPS
map. The Track Manager allows the operator to select tracks to
“show” on the map or “hide” a map not currently in use. Operators
can DELETE one track or “Delete All Tracks” at once.
General Troubleshooting Guide
IF...the display appears to not work or doesn’t come ON...
...the display could be in SLEEP mode. Touch a key on the keypad
to activate the display.
...check for loose connections at the battery and display unit.
...check for reversed polarity on the power connections.
...verify that the battery has a minimum voltage of 6 volts.
IF...the display resets or goes OFF when starting the engine...
...check that the display supply wires are connected properly
to the battery.
...verify that the battery is charged properly.
...check the battery for ecient starter current.
IF...the display has no backlight...
...contact your authorized MasterCraft dealer for assistance.
IF...the display has no keypad backlight...
...contact your authorized MasterCraft dealer for assistance.
MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-53