Touch SAVE to save the rider and settings created. The composite
prole can be displayed on the Center Display. If SAVE is not touched,
all changes will be lost when moving to another screen.
Menu Options
The MENU is displayed by pressing and holding . The follow-
ing features are available:
• GPS Utilities contains options to set up tracking and position,
chart and time and waypoint manager. It also displays satellite
status.
• Cruise settings display.
• User Settings allows the operator to customize the display op-
tions for ambient light and brightness, set U.S. or metric units,
specify the Home screen and screen set-up status.
• Engine Diagnostics displays a list of engine fault codes and de-
scriptions. On some engines, corrective action will be shown.
• Utilities allows conguration of the unit, including wire congu-
ration, plug address, fault conversion, CAN data and fault codes.
This also displays software version information at the top of the
page.
• System
• Ballast
User Settings
User Settings provides options to specify viewing preferences.
Pressing PREV and NEXT navigates through the options, and UP and
DOWN scrolls through the selections for each option.
Soft Key Commands for User Settings include:
PREV-NEXT moves from setting to setting and eld to eld.
Touch to move to the Speed settings or to go back to the
Name screen.
Touch to move to the Ballast screen.
The ballasts are modied by touching the ballast you want to set
and sliding your nger to the desired setting. While the ballast ll indica-
tor is red, the ballast are not full. When they are full, the ballast ll indi-
cator turns green. Touch to move to the Tabs screen or
to return to the previous screen.
MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-50
To Next Page
Loading...
Need help?
General
