20
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Auto Calibration This option calibrates the elevation parameters. N/A
InclineStroke% Factory Setting Only N/A
Tune Incline 1 Top
Top: 98.5
Sets the maximum incline for incline motor 1. Top: 74.5 - 99.9
Tune Incline 1 Bottom
Bottom: 1.5
Sets the minimum incline for incline motor 1. Bottom: 0.1 - 25.5
Tune Incline 2 Top
Top: 98.5
Sets the maximum incline for incline motor 2. Top: 74.5 - 99.9
Tune Incline 2 Bottom
Bottom: 1.5
Set the minimum incline for incline motor 2. Bottom: 0.1 - 25.5
ENGINEERING MODE
End Points
6.2 ENGINEERING MODE - CALIBRATION TAB
CHAPTER 6: ENGINEERING MODE