Matrix A7X-01 User Manual

81
12.1 SOFTWARE UPGRADE PROCEDURE
FIGURE A
1) Copy three software files (7x deploy.cab, io.txt, and update.config) onto a USB drive.
2) Turn on the power to the Ascent Trainer, wait until the standby picture has been cleared (Figure A).
3) Insert the USB drive into the Reprogram Port in the back of the console back cover (Figure B).
4) The upgrade procedure will run automatically (Figure C).
5) When the update is complete, the display will prompt to remove the USB drive (Figure D).
6) Power should cycle automatically once the USB drive is removed. Once the unit powers back up, test for function as outlined in Section 9.20.
FIGURE B
FIGURE C FIGURE D
CHAPTER 12: SOFTWARE UPGRADE PROCEDURE

Matrix A7X-01 Specifications

General

Brand	Matrix
Model	A7X-01
Category	Fitness Equipment
Language	English