Matrix E1X Service Manual

25
7.1 FRONT SHROUD REMOVAL
1) Remove the 18 screws holding the shrouds in place using a #2 Phillips Screwdriver.
2) There should be 8 screws on the left side (Figure A) and 10 screws on the right side (Figure B).
3) Once the screws are removed, the shroud will split into 2 pieces to be removed.
4) Figure C shows the elliptical trainer with both shrouds removed.
FIGURE A
FIGURE B
FIGURE C
CHAPTER 7: PART REPLACEMENT GUIDE

Matrix E1X Specifications

General

Brand	Matrix
Model	E1X
Category	Elliptical Trainer
Language	English