Matrix E1X Service Manual

32
1) Remove the front shrouds as outlined in Section 7.1.
2) Disconnect the 3 wire connections to the lower board (Figure A).
3) Remove the 2 screws holding the lower board to the frame (Figure B).
4) Remove the lower board.
5)ReverseSteps1-4toinstallanewlowerboard.
6) Test the elliptical trainer for function as outlined in Section 7.21.
CHAPTER 7: PART REPLACEMENT GUIDE
7.7 LOWER BOARD REPLACEMENT
FIGURE A
FIGURE B

Matrix E1X Specifications

General

Brand	Matrix
Model	E1X
Category	Elliptical Trainer
Language	English