68
1) Press ENTER, 1, 0, 0, 1, ENTER on the number keypad on the upper display and Manager Mode will appear on the display.
2) Press the key next to TV (Figure A), and then press the key next to CHANNEL SCAN (Figure B).
3) Press the - key on the number keypad and a Menu will appear on the TV (Figure C).
4) Use the volume keys to move horizontally in the Menu and the channel keys to move up or down. NOTe: You must press buttons quickly in
the Menu or it will minimize within 5 seconds.
5) Use the volume keys to move the cursor over to Channel on the top right of the Menu (Figure D).
10.4 TV PROGRAMMING INSTRUCTIONS
FIGURE A
FIGURE B
FIGURE C FIGURE D
CHAPTER 10: TREADMILL SPECIFICATIONS AND ASSEMBLY GUIDE
To Next Page
Loading...
Need help?
General
