If Automatic Update is checked the
console checks for updates at
1:00am or if it's been more than 24
hours since the last check. If an
update is available the console
downloads it. When all update files
are downloaded the console waits
for the following events to install the
updates: when the console goes
into ErP or Demo Video Mode (it
installs the updates then enters
these modes); if the user powers
down the console then install the
update when it powers back on.
Check a connected USB drive for
updates. If updates are found they
will be listed under Available
Updates and the button will display
Install.
Check DAPI server for updates. If
updates are found they will be listed
under Available Updates and the
button will display Install.