Matrix XER Service Manual

40
CHAPTER 7: XIR/ XER CONSOLE SERVICE MODE
7.10 Hardware
Category
Name
Default
Range
Units
Comments
Hardware
USB
Connection
Mode
Host
Host, Device
Switches the USB port from Host (user can
plug in USB/Phone for media) to Device
(used for ADB and development). Note that
the console must reboot for this switch to
take effect.
ErP
No
Check
Check/No
Check
--
Alternates between ErP which puts the
console in a low power mode and launching
the Demo Video. When checked the console
goes into ErP, when not checked the console
launches the Demo Video. These actions
occur after a time of inactivity (no workout,
touch events, etc.) determined by the ErP
Timeout setting. Pressing any physical key
wakes up the console from ErP or the Demo
Video and returns it to the Home/Go Screen.
The Demo Video can also be exited by
touching the screen.
ErP Timeout
15
1-60
Minutes
Amount of time after which the console
enters a low power mode or the Demo Video
Backlight
Brightness
100
0-100
--
Set the brightness of the screen.
Key Test
--
--
All
physical
key
presses.
Read Only. Starts when you enter the test.
Causes the console to display the all
subsequent physical key presses on the
console. Exit by selecting a tab.
Play Key
Sound
Check
Check/No
Check
--
Sound plays when the user presses the
frame buttons (e.g., incline up/down,
resistance up/down, etc.)
Play
Workout
Countdown
Sound
Check
Check/No
Check
--
--
Master
Volume
5
0-30
--
All apps have their volume maxed, this sets
the system-wide volume. The volume
matches the DQE standard. Does not affect
the system beep volume.
Headphone
Insertions
0
--
--
Read only. Keeps a count of how many times
headphones have been inserted and
removed from the headphone jack. Can be
reset by restoring to factory defaults.
Reset
--
--
--
Button that resets the Headphone Insertions
and Removals counts to 0.

Matrix XER Specifications

General

Brand	Matrix
Model	XER
Category	Music Mixer
Language	English