Mac address is polled from
the installed hardware.Read
Only, should not show up if
not connected to Wifi.
If the user selects 'Other
Network' they should be
prompted to enter the
Network Name,
Password and the
security protocol from
None, WEP, WPA, WPA2,
WPAPSK, WPA2PSK.If
the user selects the
network the console is
currently connected to
(indicated by a different
colored Wifi symbol) they
should be prompted with
the option to forget the
settings for that network.
Follows the same look and
function as First Time Setup
for Wifi setup: lists available
wireless networks, their
signal strength on the
console and which one the
console is connected to if it is
connected to one. Tapping a
network name has the
console prompt the user to
enter the network password if
there is one required. If the
user inputs the wrong
credentials the system
notifies them that the console
was unable to connect to the
network and they are
returned to the network list.
Additionally, tapping on the
network the console is
currently connected to
(indicated by a different
colored Wifi symbol) will
present a dialog with the
option to forget the settings
for that network..