Maxcom MM920 User Manual

13
• After the battery is in position, make sure the
battery cover seal is in position as well. Then,
put the battery cover on the phone and gently
press on the edges. Use the screwdriver to
screw four bolts on the cover.
Charging the Battery
Important! Only the battery included in the set should be
used. Using other batteries might damage the phone and
shall void warranty.
Never connect the charger while the back cover is
removed.
To charge the phone:
1. Use your fingernail to lift away the cover over
USB/headphones port.
2. Plug the charger into a power outlet.

Maxcom MM920 Specifications

General

Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Calculator	Yes
Standby time	460 h
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Rear camera resolution (numeric)	2 MP
SIM card capability	-
2G bands (primary SIM)	900, 1800 MHz
Mobile network generation	2G
Form factor	Bar
Personal info management (PIM)	Alarm clock, Calculator, Calendar
Cables included	USB
Subscription type	No subscription
Product color	Yellow
Battery capacity	- mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	14 mm
Width	64 mm
Height	139 mm
Weight	140 g