Maxcom MM920 User Manual

53
Restore Factory Settings
This option allows you to restore factory settings. Select in
MENU: Settings->Restore Factory Settings, and enter the
security code. Press the Left Function Key to confirm.
16. Computer Connection
You can connect the phone to a computer using a USB
cable; you can copy and transfer files between the phone
and the computer.
Getting connected:
- plug the USB into the phone
- plug the other end of the USB cable to the USB port in
the computer
- there will be a message on the phone screen: „Mass
Memory Device” and „Port COM”. Select: Mass Memory
Device.
17. FAQ (Troubleshooting)
Only qualified service workers are authorized to repair the
phone. Any attempts of unauthorized repair and
modifications void the Manufacturer’s warranty!
„Cannot make a
phone call”
Make sure the number you are dialing is
correct. If you make an international phone
call, dial a country code before the actual
number (eg. 0049 or +49 for Germany).
Warning: Default security code : 0000

Maxcom MM920 Specifications

General

Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Calculator	Yes
Standby time	460 h
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Rear camera resolution (numeric)	2 MP
SIM card capability	-
2G bands (primary SIM)	900, 1800 MHz
Mobile network generation	2G
Form factor	Bar
Personal info management (PIM)	Alarm clock, Calculator, Calendar
Cables included	USB
Subscription type	No subscription
Product color	Yellow
Battery capacity	- mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	14 mm
Width	64 mm
Height	139 mm
Weight	140 g