Black plate (139,1)
Before Getting In
l
Be sure the windows, outside mirrors,
and outside lights are clean.
l
Inspect inflation pressures and
condition of tires.
l
Look under the vehicle for any sign of
fluid leaks.
l
If you plan to back up, make sure
nothing is in your way.
NOTE
Engine oil, engine coolant, brake fluid, washer
fluid, and other fluid levels should be
inspected. See Maintenance, Section 8.
After Getting In
l
Are all doors closed and locked?
l
Is the seat adjusted properly?
l
Are the inside and outside mirrors
adjusted?
l
Is everyone's seat belt fastened?
l
Check all gauges.
l
Check all warning lights when the
ignition switch is turned to the ON
position.
l
Release the parking brake and make
sure the brake warning light goes off.
Always be thoroughly famili ar with your
Mazda.
Before Driving Your Mazda
Before Starting the Engine
4-5
CX-7_8X59-EA-07E_Edition3 Page139
Wednesday, July 25 2007 3:17 PM
Form No.8X59-EA-07E
To Next Page
Loading...
Need help?
General
