McCulloch B28 PS User Manual

English--- 14
115432326 Rev. 4 2/17/12
FUEL HANDLING
S Always start by flling half the amount of the
petrol to be used. Then add the entire
amount of oil. Mix (shake) the fuel mixture.
Add the remaining amount of petrol.
S Mix (shake) the fuel mixture thoroughly
before filling the machine’s fuel tank.
S Do not mix more than one month’ s sup-
ply of fuel at a time.
S If the machine is not used for some time,
the fuel tank should be emptied and
cleaned.
W ARNING: The catalytic con-
verter muffler gets very hot during
and after use. This also applies
during idling. Be aware of the fire
hazard, especially when working
near flammable substances and/or
vapors.
Fueling
WARNING: T a king the following
precautions, will lessen the risk of
fire:
Do not smoke or place hot objects
near fuel.
Always shut off the engine before
refueling.
Always stop the engine and let
it cool for a few minutes before
refueling.
When refueling, open the fuel cap
slowly so that any excess pressure
is released gently.
Tighten the fuel cap carefully after
refueling.
Always move the machine away
from the refueling area before
starting.
Min. 3 m
Mi
x
i
ng
S Always mix the petrol and oil in a clean
container intended for fuel.
S Clean the area around the fuel cap.
Contamination in the tank can cause
operating problems.
S Ensure that the fuel is well mixed by shak-
ing the container before filling the tank.

McCulloch B28 PS Specifications

General

Type	Brush cutter
Head type	Blade & nylon line
Handle type	D-loop handle
Product color	Black
Rotational speed	8000 RPM
Sound power level	114 dB
Fuel tank capacity	0.45 L
Vibration emission	4.4 m/s²
Engine displacement	28 cm³
Sound pressure level	100 dB
Cutting diameter (max)	25.4 mm
Power source	Gasoline

Weight and Dimensions

Weight	5500 g