EasyManuals Logo
Home>McCulloch>Trimmer>B28 PS

McCulloch B28 PS User Manual

McCulloch B28 PS
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
English--- 5
115432326 Rev. 4 2/17/12
GENERAL SAFETY PRECAUTIONS
IMPORTANT! Listen for warning signals
or shouts when you are wearing hearing
protection. Alw ays re move your hearing
protection as soon as the engine stops.
HELMET
A helmet should be worn if the brush being
cleared is taller than 2 metres.
HEARING PROTECTION
Wear hearing protection that provides
adequate noise reduction.
EYE PROTECTION
Always wear approved eye protection. If
you use a visor then you must also wear
approved protective goggles. Approved
protective goggles must comply with EN
166 in EU countries.
Personal protective equipment
WARNING: A clearing saw,
brushcutter or trimmer , if used in-
correctly or carelessly , can cause
serious or fatal injury to the operator
or others. It is extremely important
that you read and understand the
contents of this operator’s manual.
Y ou must use approved personal
protective equipment wheneve r you
use the machine. Personal protec-
tive equipment cannot eliminate the
risk of injury but it will reduce the
degree of injury if an accident does
happen. Ask your dealer for help in
choosing the right equipmen t.
Important
IM PORTANT! The machine is only designed
for trimming grass, grass clearing and/or
forestry clearing .
The only accessories you can operate with
this engine unit are the cutting attachments we
recommend in the section on Technical data.
Never use the machine if you are tired, if you
have drunk alcohol, or if you are taking medi-
cation that could affect your vision, your judge-
ment or your co--ordination.
Never use the machine in extreme weather
conditions such as severe cold, very hot and/
or humid climates.
Wear personal protective equipment. See in-
structions under the heading Personal protec-
tive equipment.
Never use a machine that has been modified
in any way from its original specification.
Never use a machine that is faulty . Carry out
the checks, maintenance and service instruc-
tions described in this manual. Some mainte-
nance and service measures must be carried
out by trained and qualified specialists. See
instructions under the heading Maintenance.
All covers and guards must be fitted before
starting. Make sure the spark plug cap and
lead are not damaged. Otherwise you could
get an electric shock.
The machine operator must ensure that no
people or animals come closer than 15 metres
while working. When several operators are
working in the same area, the safety distance
should be at least 15 metres.
WARNING: Never allow children
to use or be in the vicinity of the
machine. As the machine is equipped
with a spring--loaded stop switch and
can be started by low speed and
force on the starter handle, even
small children under some circum-
stances can produce the force neces-
sary to start the machine. This can
mean a risk of serious personal inju-
ry. There fo re rem ov e the spark plug
cap when the machine is not under
close supervision.
WARNING: Using an incorrect
cutting attachment or an incorrectly
filed blade can increase the risk of
serious or fatal injury.
W ARNING: This machine pro-
duces an electromagnetic field
during operation. Under some cir-
cumstances, this field may interfere
with active or passive medical
implants. To reduce the risk of
serious or fatal injury, we recom-
mend persons with medical
implants to consult their physician
and the medical implant manufac-
turer before operating this machine.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the McCulloch B28 PS and is the answer not in the manual?

McCulloch B28 PS Specifications

General IconGeneral
TypeBrush cutter
Head typeBlade & nylon line
Handle typeD-loop handle
Product colorBlack
Rotational speed8000 RPM
Sound power level114 dB
Fuel tank capacity0.45 L
Vibration emission4.4 m/s²
Engine displacement28 cm³
Sound pressure level100 dB
Cutting diameter (max)25.4 mm
Power sourceGasoline
Weight and Dimensions IconWeight and Dimensions
Weight5500 g

Related product manuals