117
Controls in detail
Memory function
Storing positions into memory
왘 Adjust the seats, steering wheel and
exterior mirrors to the desired position
(
컄 page 34).
왘 Press memory button 2.
왘 Release memory button 2 and push
one of the position buttons 1 within
three seconds.
All the settings are stored with the se-
lected position.
Recalling positions from memory
왘 Press and hold one of the position
buttons 1 until the seat, steering
wheel and exterior mirrors have fully
moved to the stored positions.
Storing exterior rear view mirror park-
ing position
For easier parking, you can adjust the pas-
senger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position, see “Setting parking position for
exterior rear view mirror” (
컄 page 156).
i
Releasing the button immediately
stops movement to the stored posi-
tions.
Warning! G
Do not operate the power seats using the
memory button if the seat backrest is in an
extremely reclined position. Doing so could
cause damage to front or rear seats.
First move seat backrest to an upright posi-
tion.
i
You can store a parking position for the
passenger-side exterior rear view mir-
ror for each SmartKey or SmartKey
with KEYLESS-GO*.
To Next Page
Loading...
Need help?
General
