Mercedes-Benz 2004 CL-Class User Manual

145
Controls in detail
Control system
왘 Press button è or ÿ repeatedly
until you see the malfunction message
memory in the display.
No malfunction messages
If no malfunctions have occurred, the mes-
sage in the display is:
NO MALFUNCTION
Malfunctions have occurred
If malfunctions have occurred, you will see
the number of malfunctions in the display:
1 Number of malfunctions
왘 Press button j or k.
The stored messages will now be dis-
played in order in wich the malfunc-
tions have occurred. See the “Practical
hints” section for malfunction and
warning messages (
컄 page 299).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the SmartKey in
the starter switch is turned to position 0 or
removed from the starter switch.
Settings menu
In the
SETTINGS menu there are two func-
tions:
앫 The function RESET WITH R BUTTON FOR
3 SEC.
, with which you can reset all the
settings to the original factory settings.
앫 A collection of submenus with which
you can make individual settings for
your vehicle.
왘 Press button è or ÿ repeatedly
until the
SETTINGS menu appears in the
display.
i
The message memory will be cleared
when you turn the SmartKey in the
starter switch to position 1 or 2. You
will then only see high priority malfunc-
tions (
컄 page 299).

Mercedes-Benz 2004 CL-Class Specifications

General

Brand	Mercedes-Benz
Model	2004 CL-Class
Category	Automobile
Language	English