372
Technical data
Fuels, coolants, lubricants, etc.
ì™” Fuels, coolants, lubricants, etc.
Capacities Vehicle components and their respective
lubricants must match. Therefore use only
brands tested and approved by us.
Please refer to the Factory Approved Ser-
vice Products pamphlet, or inquire at your
Mercedes-Benz Center.
Model Capacity Fuels, coolants, lubricants, etc.
Engine with oil filter CL 500
CL 55 AMG
CL 600
8.5 US qt (8.0 l)
7.9 US qt (7.5 l)
9.5 US qt (9.0 l)
Approved engine oils
Automatic transmission CL 500
CL 55 AMG
CL 600
9.1 US qt (8.6 l)
9.1 US qt (8.6 l)
8.1 US qt (7.7 l)
MB Automatic Transmission Oil
Rear axle
CL 55 AMG
and CL 600
1.7 US qt (1.6 l)
2.1 US qt (2.0 l)
Hypoid gear oil SAE 85 W 90
Hydraulic system for ABC approx. 4.2 US qt (4.0 l) MB Hydraulic fluid
Power steering approx. 1.1 US qt (1.0 l) MB Power Steering Fluid
(Pentosin CHF 11S)
Front wheel hubs approx. 3.5 oz (100 g) each High temperature roller bearing grease
Brake system 0.7 US qt (0.7 l) MB Brake Fluid (DOT 4+)
Cooling system CL 500
CL 55 AMG
CL 600
approx. 12.1 US qt (11.5 l)
approx. 15.3 US qt (14.5 l)
approx. 15.85 US qt (15 l)
MB 325.0 Anticorrosion/Antifreeze
To Next Page
Loading...
Need help?
General
