Control panel for THERMATIC automatic climate control (2-zone)
:
To set the temperature, left (Y page 153)
;
To demist the windscreen (Y page 154)
=
To switch the ZONE function on/off (Y page 154)
?
To activate/deactivate cooling with air dehumidification (Y page 150)
A
To switch the rear window heating on/off (Y page 155)
B
To set the temperature, right (Y page 153)
C
To activate/deactivate air-recirculation mode (Y page 156)
D
To set the air distribution (Y page 153)
E
To increase the airflow (Y page 154)
F
To reduce the airflow (Y page 154)
G
To switch climate control on/off (Y page 150)
H
To set climate control to automatic mode (Y page 152)
Notes on using THERMATIC automatic
climate control
Automatic climate control
The following contains notes and recommen-
dations on optimum use of THERMATIC auto-
matic climate control.
R
Activate climate control using the à and
¿ buttons. The indicator lamps in the
à and ¿ buttons light up.
R
Set the temperature to 22 †.
R
Only use the "windscreen demisting" func-
tion briefly until the windscreen is clear
again.
R
Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odours or
when in a tunnel. The windows could oth-
erwise mist up as no fresh air is drawn into
the vehicle in air-recirculation mode.
R
Use the ZONE function to adopt the tem-
perature settings on the driver's side for
the front-passenger side as well. The indi-
cator lamp in the á button goes out.
Overview of climate control systems
147
Climate control
To Next Page
Loading...
Need help?
General
