EasyManuals Logo

Mercedes-Benz 2013 C-Class W204 Sedan User Manual

Mercedes-Benz 2013 C-Class W204 Sedan
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #379 background imageLoading...
Page #379 background image
short time. This is rectified after a few
minutes of driving and the tyre pressures
are displayed for the correct positions.
Restarting the tyre pressure monitor
When you restart the tyre pressure monitor,
all existing warning messages are deleted and
the warning lamps go out. The monitor uses
the currently set tyre pressures as the refer-
ence values for monitoring. In most cases, the
tyre pressure monitor will automatically
detect the new reference values after you
have changed the tyre pressure. However,
you can also define reference values man-
ually as described here. The tyre pressure
monitor then monitors the new tyre pressure
values.
i
You will find an overview of the menus on
(Y page 242).
X
Use the table on the inside of the fuel filler
flap to ensure that the tyre pressure is set
correctly in all four tyres for the current
operating conditions.
Also observe the notes in the section on
tyre pressures (Y page 372).
X
Make sure that the key is in position 2 in
the ignition lock.
X
Press the = or ; button on the steer-
ing wheel to select the Service menu.
X
Press the 9 or : button to select
Tyre pressure.
X
Press the a button.
The multifunction display shows the cur-
rent tyre pressure for the individual tyres or
the Tyre pressures will be dis‐
played after a few minutes of driv‐
ing message.
X
Press the : button.
The Use current pressures as new
reference values message appears in
the multifunction display.
If you wish to confirm the restart:
X
Press the a button.
The Tyre press. monitor restarted
message appears in the multifunction dis-
play.
After you have driven for a few minutes, the
system checks whether the current tyre
pressures are within the specified range.
The new tyre pressures are then accepted
as reference values and monitored.
If you wish to cancel the restart:
X
Press the % button.
The tyre pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tyre pres-
sure monitor
In certain countries, a radio type approval for
the tyre pressure monitor may be required.
The radio type approval number for the tyre
pressure monitor can be found online at:
http://www.mercedes-benz.de/
betriebsanleitung.
Country Radio type approval number
Brazil 1489-10-4415
Model: MRXMERCTX1
Dubai TRA, Registered NO:
0016161/08
TRA, Registered NO
ER0076990/11
Dealer-NO: DA0047074/10
Morocco MR5526 ANRT 2010/
27/04/2010
MR6706 ANRT 2011/
17/11/2011
Philip-
pines
ESD-1105558C
Serbia И 011 12
Tyre pressure
377
Wheels and tyres
Z

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercedes-Benz 2013 C-Class W204 Sedan and is the answer not in the manual?

Mercedes-Benz 2013 C-Class W204 Sedan Specifications

General IconGeneral
BrandMercedes-Benz
Model2013 C-Class W204 Sedan
CategoryAutomobile
LanguageEnglish

Related product manuals