X
To install: insert one bracket ; into both
the left and the right loading rails and slide
it to the desired position (Y page 323).
X
Insert telescopic rod : into brackets ;
and press downwards until it engages.
X
Make sure that locking button = on brack-
ets ; is pressed.
This keeps brackets ; in place on the
loading rail.
X
To remove: press release button ? on
respective bracket ; and remove tele-
scopic rod : by pulling it upwards and out.
Stowage well under the boot floor
The TIREFIT kit, the vehicle tool kit, etc. are
located in the stowage compartment.
X
To open: pull handle : up.
X
Hook handle : into rain trough ;.
!
Remove the handle again before closing
the boot lid and snap it in tightly to prevent
the handle flap from protruding. Otherwise,
you could damage the handle.
Stowage well under the luggage com-
partment floor (Estate)
G
WARNING
If you drive when the luggage compartment
floor is open, objects could be flung around,
thus striking vehicle occupants. There is a risk
of injury, especially when braking or abruptly
changing directions.
Always close the luggage compartment floor
before a journey.
A removable insert under the luggage com-
partment floor contains the parts of the EASY-
PACK load-securing kit and a folding box.
TIREFIT and the tyre-change tool kit, etc. are
stored beneath this insert.
324
Stowage areas
Stowing and features