X
Switch on your mobile phone and audio
system or COMAND Online, see the sepa-
rate operating instructions.
X
Place a mobile phone in the mobile phone
bracket (Y page 330), or establish a Blue-
tooth
®
connection with the audio system
or COMAND Online (see the separate oper-
ating instructions).
X
Press the = or ; button on the steer-
ing wheel to select the Tel menu.
You will see one of the following display mes-
sages in the multifunction display:
R
Please enter PIN: the mobile phone has
been placed in the mobile phone bracket
and the PIN has not been entered.
When you enter your PIN via the mobile
phone, LINGUATRONIC, the audio system
or COMAND Online, the mobile phone
searches for a network.
R
Telephone ready or the name of the net-
work provider: the mobile phone has found
a network and is ready to receive.
R
Telephone No service: there is no net-
work available or the mobile phone is
searching for a network.
i You can obtain further information about
suitable mobile phones and connecting
mobile phones via Bluetooth
®
:
R
from any Mercedes Benz Service Centre
R
on the Internet at: http://
www.mercedes-benz.com/connect
Accepting a call
If someone calls you when you are in the
Tel menu, a display message appears in the
multifunction display, for example:
Example: incoming call
X
Press the 6 button on the steering
wheel to accept an incoming call.
You can accept a call even if you are not in
the Tel menu.
Rejecting or ending a call
X
Press the ~ button on the steering
wheel.
You can end or reject a call even if you are not
in the Tel menu.
Dialling an entry from the phone book
X
Press the = or ; button on the steer-
ing wheel to select the Tel menu.
X
Press the 9, : or a button to
switch to the phone book.
X
Press the 9 or : button to select the
desired name.
or
X
To begin rapid scrolling: press and hold
the 9 or : button for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
X
If only one telephone number is stored
for a name: press the 6 or a button
to start dialling.
or
X
If there is more than one number for a
particular name: press the 6 or a
button to display the numbers.
X
Press the 9 or : button to select the
number you want to dial.
X
Press the 6 or a button to start dial-
ling.
or
X
To exit the telephone book: press the
~ or % button.
Redialling
The on-board computer saves the last names
or numbers dialled in the redial memory.
Displays and operation (12-button multifunction steering wheel)
247
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
