X
Press the a button.
X
Press the : button to select YesYes and
press the a button to confirm.
You can reset the values of the following func-
tions:
R
Trip odometer
R
"From Start" trip computer
R
"From Reset" trip computer
R
ECO display
i
If you reset the values in the ECO display,
the values in the "From start" trip computer
are also reset. If you reset the values in the
"From start" trip computer, the values in
the ECO display are also reset.
Navigation system menu
Displaying navigation instructions
In the NaviNavi menu, the multifunction display
shows navigation instructions. For more
information on navigation, see the separate
operating instructions.
X
Switch on COMAND (see the separate
operating instructions).
X
Press the = or ; button on the steer-
ing wheel to select the NaviNavi menu.
Route guidance not active
:
Direction of travel
;
Current road
Route guidance active
No change of direction announced
:
Distance to the destination
;
Distance to the next change of direction
=
Current road
?
"Follow the road's course" symbol
Change of direction announced without a
lane recommendation
:
Road into which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Change-of-direction symbol
When a change of direction is announced, you
will see symbol = for the change of direction
and distance graphic ;. The distance indi-
cator shortens towards the top of the display
as you approach the point of the announced
change of direction.
Menus and submenus
199
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
