You will see one of the following display mes-
sages in the multifunction display:
R
Phone READYPhone READY or the name of the network
provider: the mobile phone has found a
network and is ready to receive.
R
Phone No ServicePhone No Service: there is no network
available or the mobile phone is searching
for a network.
Accepting a call
Example: incoming call
X
Press the 6 button on the steering
wheel to accept an incoming call.
If someone calls you when you are in the TelTel
menu, a display message appears in the mul-
tifunction display.
You can accept a call even if you are not in the
TelTel menu.
Rejecting or ending a call
X
Press the ~ button on the steering
wheel.
You can end or reject a call even if you are not
in the TelTel menu.
Dialing an entry from the phone book
X
Press the = or ; button on the steer-
ing wheel to select the TelTel menu.
X
Press the 9, : or a button to
switch to the phone book.
X
Press the 9 or : button to select the
desired name.
or
X
To begin rapid scrolling: press and hold
the 9 or : button for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
X
If only one telephone number is stored
for a name: press the 6 or a button
to start dialing.
or
X
If there is more than one number for a
particular name: press the 6 or a
button to display the numbers.
X
Press the 9 or : button to select the
number you want to dial.
X
Press the 6 or a button to start dial-
ing.
or
X
To exit the phone book: press the ~ or
% button.
Redialing
The on-board computer saves the last names
or numbers dialed in the redial memory.
X
Press the = or ; button on the steer-
ing wheel to select the TelTel menu.
X
Press the 6 button to switch to the
redial memory.
X
Press the 9 or : button to select the
desired name or number.
X
Press the 6 or a button to start dial-
ing.
or
X
To exit the redial memory: press the
~ or % button.
202
Menus and submenus
On-board computer and displays
To Next Page
Loading...
Need help?
General
