X
Press the : or 9 button to select the
Display Unit Speed-/OdometerDisplay Unit Speed-/Odometer func-
tion.
You will see the selected setting: kmkm or
milesmiles.
X
Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R
Digital speedometer in the TripTrip menu
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Navigation instructions in the NaviNavi menu
R
Cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Switching the additional speedometer
on/off
Only vehicles with manual transmission have
this function.
X
Press the = or ; button on the steer-
ing wheel to select the SettSett menu.
X
Press the : or 9 button to select the
Instrument ClusterInstrument Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Additional Speedometer [mph]Additional Speedometer [mph] func-
tion.
You will see the selected setting: OnOn or OffOff.
X
Press the a button to save the setting.
i
Speed is displayed in mph.
The AdditionalAdditional SpeedometerSpeedometer [mph][mph] func-
tion allows you to choose whether the status
area in the multifunction display always
shows the speed in mphmph instead of the outside
temperature.
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the steer-
ing wheel to select the SettSett menu.
X
Press the : or 9 button to select the
Instrument ClusterInstrument Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent DisplayPermanent Display function.
You will see the selected setting OutsideOutside
TemperatureTemperature or Additional Speedome‐Additional Speedome‐
ter [km/h]ter [km/h]/AdditionalAdditional SpeedometerSpeedometer
[mph][mph].
X
Press the a button to save the setting.
i
The speed is highlighted in km/h or in
mph conversely to your speedometer.
Lights
Setting the daytime running lamps
i
This function is not available in Canada.
X
Press the = or ; button on the steer-
ing wheel to select the SettSett menu.
X
Press the : or 9 button to select the
LightLight submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Daytime Running LightsDaytime Running Lights function.
If the Daytime Running LightsDaytime Running Lights function
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in orange.
X
Press the a button to save the setting.
Further information on daytime running
lamps (Y page 109).
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the steer-
ing wheel to select the SettSett menu.
X
Press the : or 9 button to select the
LightLight submenu.
Menus and submenus
205
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
