X
Using lug wrench :, loosen the bolts on
the wheel you wish to change by about one
full turn. Do not unscrew the bolts com-
pletely.
The jacking points are located just behind the
front wheel housings and just in front of the
rear wheel housings (arrows).
Covers, front (example: vehicles with AMG equip-
ment)
AMG vehicles and vehicles with AMG
equipment: to protect the vehicle body, the
vehicle has covers next to the jacking points
on the outer sills.
X
AMG vehicles and vehicles with AMG
equipment: fold cover ; upwards.
X
Position jack ? at jacking point =.
Example
X
Make sure the foot of the jack is directly
beneath the jacking point.
X
Turn crank A clockwise until jack ? sits
completely on jacking point = and the
base of the jack lies evenly on the ground.
X
Turn crank A until the tire is raised a max-
imum of 1.2 in (3 cm) from the ground.
Removing a wheel
!
Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
Changing a wheel
335
Wheels and tires
Z