Safety systems
Display messages
Possible causes/consequences and MM Solutions
!÷
Currently Unavail‐Currently Unavail‐
able See Opera‐able See Opera‐
tor's Manualtor's Manual
ABS (Anti-lock Braking System), ESP
®
(Electronic Stability Pro-
gram), BAS (Brake Assist), PRE‑SAFE
®
, the HOLD function and hill
start assist are temporarily unavailable.
BAS PLUS and PRE‑SAFE
®
Brake may also have failed.
In addition, the ÷, å and ! warning lamps light up in the
instrument cluster.
ATTENTION ASSIST is deactivated.
Possible causes are:
R
self-diagnosis is not yet complete.
R
the on-board voltage may be insufficient.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Carefully drive a suitable distance, making slight steering move-
ments at a speed above 12 mph (20 km/h).
If the display message disappears, the functions mentioned
above are available again.
If the display message continues to be displayed:
X
Drive on carefully.
X
Visit a qualified specialist workshop.
!÷
Inoperative SeeInoperative See
Operator's ManualOperator's Manual
ABS, ESP
®
, BAS, PRE‑SAFE
®
, the HOLD function and hill start
assist are unavailable due to a malfunction.
BAS PLUS and PRE‑SAFE
®
Brake may also have failed.
The $ (USA only)/J (Canada only), ÷, å and !
warning lamps in the instrument cluster also light up.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
Display messages
213
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
