B
Adjusting Power Seats, Front
The switches are located in each front
door, if your vehicle is equipped with
front power seats.
Turn key to steering lock position 1
or 2 (with the driver’s or front passen
ger’s door opened, the power seats
can also be operated with the key re
moved or in steering lock position 0).
Seat and Head Restraint Adjustment:
A Seat cushion adjustment.
B Seatback adjustment.
C Head restraint adjustment.
Adjust head restraint to support
the back of the head approxi
mately at ear level. The head re
straint can also be turned forward
by hand.
32
c
1040
Note:
If the car is equipped with power
head restraints, do not try to
operate manually.
Warning!
Do not adjust the driver’s seat while
driving. Adjusting the seat while
driving could cause the driver to
lose control of the vehicle.
Never ride in a moving vehicle with
the seat back reclined. The seat
back and seat belts provide the
best restraint when the wearer is in
an upright position and the belts
are properly positioned on the
body.
Storing seat and head restraint posi
tions in memory:
D Memory button.
E Position buttons “ 1” and “2” .
Two sets of seat/head restraint posi
tions may be programmed into me
mory. After the seat and head restraint
are positioned, push memory button
“D”, release, and within 3 seconds
push position button “1”. A second set
of positions for the same seat and
head restraint can be programmed
into memory by pushing first button
“D” and then “2”.
Recalling seat and head restraint posi
tions stored in memory:
To recall a seat/head restraint posi
tion, push position button “1” or “2”
until seat/head restraint movement
has stopped. For safety reasons, the
seat/head restraint movement stops
after releasing the position button.
Caution!
Do not remove head restraints exept
when mounting seat covers. For re
moval refer to “Practical Hints”,
page 89. Whenever restraints have
been removed be sure to reinstall
them before driving.
To Next Page
Loading...
Need help?
General
