Front Head Restraints
Removing head restraints:
Bring the head restraint to its highest
position.
Depress release button (1) under the
seatback covering material and pull
head restraint up sharply, holding it by
the left head restraint post (viewed in
driving direction). Then pull out head
restraint completely with both hands.
The release button (1) is located be
low the left head restraint post on both
front seats.
Installing head restraints:
Insert the head restraint and push it
down to the stop.
Check if the highest position can be
reached. (Power head restraints: slide
the switch up for approximately 5 sec
onds; manual head restraints: pull
handwheel out and rotate it rearward
to the stop.)
Adjust head restraint to the desired
position.
Warning!
For your protection, drive only with
properly positioned head restraints.
Do not drive the vehicle without the
front seat head restraints. Head
restraints are intended to help re
duce injuries during an accident.
For positioning of head restraints refer
to pages 31 and 32.
To Next Page
Loading...
Need help?
General
