Rear Seat Cushion
Removal: Push in locking tabs (1) (on
left and right side) and carefully pull up
seat at the front.
Installation: Slide rear edge of cushion
under the backrest so that both wire
loops under the backrest engage at
the seat cushion. Push front of cush
ion down until it locks in place.
Ash Tray
To remove front ash tray:
Open ash tray against stop. Push
handle down and simultaneously pull
ash tray out, allowing the insert to
release.
To install:
Install insert into ash tray frame and
push down to engage.
To remove rear ash tray:
Push the ash tray down while opening
and remove.
To install:
Position ash tray squarely and push
in.
88
To Next Page
Loading...
Need help?
General
