#
When leaving the vehicle, always take the
key with you and lock the vehicle.
You can use the memory function when the vehi-
cle is switched o.
Seat settings for up to three people can be stored
and called up using the memory function.
You can save settings for the following systems:
R
Seat, backrest and head restraint
R
Steering wheel
R
Outside mirrors
R
Head-up display
Operating the memory function
Storing
#
Set the desired position for all systems.
#
Press the memory button V and then
press memory position switch 4, T or
U within three seconds.
An acoustic signal will sound. The settings are
stored.
#
To call up: press or briey hold memory posi-
tion switch 4, T or U.
Aer you release the switch, all systems will
be moved into the stored position.
Stowage areas
Notes on loading the vehicle
&
DANGER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the tail-
gate is open when the engine is running, espe-
cially if the vehicle is in motion.
#
Always switch o the engine before
opening the tailgate.
#
Never drive with the tailgate open.
Objects in the deployment area of an air bag may
prevent the air bag from functioning correctly.
Also observe the notes on the air bags
(/ page 54).
Seats and stowing
107
To Next Page
Loading...
Need help?
General
